Description: RINCHEVAL Heater of high inertia, thermal power of 800,000 kcal/h (930 KW), Complete automatic functioning, mounted on oil tank.
- Welded construction, with over pressure boiler furnace.
- Expansion interior membranes, at the front and at the rear of the generator.
- Rectilinear returning fumes tubes, not exposed to the flame.
- Bolted back inside the firebox, without scalloping.
- Large fumes box.
- Rock wool sheet insulation, 130 mm thick, protected by an ISOXALE cover.
- Demountable fumes box for inspection of the firebox and returning fumes tubes
- Thermal exchange, 2 W/cm²
- Fumes temperature lower than 300°C at the gas stackl.
- 2-speed burner, fully automatic. Power of 800,000 kcal/h, functioning with FOD.
- Expansion tank, capacity 1,500 litres with electric level sensor for safety. Specific float to avoid oil oxidation at the surface. Supporting structure: 4 m high.
- High temperature oil circulation group, centrifugal type, flow of 60 m3/h, to feed the oil tubes
- Regulated temperature oil circulation group, centrifugal type, flow of 30 m3/h, to feed the platform for special bitumen manufacturing.
- Oil circulation group, volumetric type, flow 3m3/h for oil filling
- 3-way motorized mixer valve, driven by a PID type numeric regulator
- PT 100 probes for measure and regulation of temperature of hot and return oil
- Gas stack, 4 m high, made of ordinary steel.
- Automatic programming of heating. Numeric regulators for hot and return oil
- Wiring and connection of the different components in our workshop
- Mounted on a chassis
- Delivered to site ready to work
- Hot Oil Boiler Range available from 550 kW to 1750 kW
